Our Products.

Our factory located in the center of America elaborates products such as wire drawn in high and low carbon for special uses and mattress springs, in addition to steel rod of the highest quality, which are distributed in Central America, South America and part of the Caribbean.






High Carbon Steel Wire.

High Carbon steel wire, cold drawn, processed with the International standard ASTM A-407, which specifies round wire, cold drawing quality properties and planned manufacturing steel springs for mattresses and upholstery.

Uses:
For the manufacturing of the following type of wires

  • Bonnell
  • Offset
  • Pocket
  • CosiFLEX
  • Cosisoft
  • Assembly
  • Strain
  • Selfa
  • Rodsbedframes
  • Bedframes




BONNELL SPRING TYPE

Gauge inch mm ±0.01 kPSI – Mpa [Min/Max]
Cal 14 0.080 2.03 230/270 – 1585/1850
Cal 13 ½ 0.087 2.20 220/255 – 1500/1750
Cal 13 0.091 2.32 215/250 – 1450/1700
Cal 12 0.106 2.68 205/235 – 1400/1600

OFFSET SPRING TYPE

Gauge inch mm ±0.01 kPSI – Mpa [Min/Max]
Cal 14 0.080 2.03 230/270 – 1585/1850
Cal 13 ½ 0.087 2.20 220/255 – 1500/1750
Cal 13 0.091 2.32 215/250 – 1450/1700
Cal 12 0.106 2.68 205/235 – 1400/1600

POCKET SPRING TYPE & CONTINUOS

Gauge inch mm ±0.01 kPSI – Mpa [Min/Max]
Cal 16 0.063 1.60 280/320 – 1900/2200
Cal 15 0.072 1.83 280/320 – 1900/2200
Cal 14 0.080 2.03 270/300 – 1850/2050

SPRING TYPE LFK COSIFLEX

Gauge inch mm ±0.01 kPSI – Mpa [Min/Max]
Cal 16 0.063 1.60 280/320 – 1900/2200
Cal 15 0.072 1.83 280/320 – 1900/2200
Cal 14 0.080 2.03 270/300 – 1850/2050

SPRING TYPE COSISOFT

Gauge inch mm ±0.01 kPSI – Mpa [Min/Max]
Cal 16 0.063 1.60 280/320 – 1900/2200
Cal 15 0.072 1.83 280/320 – 1900/2200
Cal 14 0.080 2.03 270/300 – 1850/2050

SPRING TYPE ASSEMBLY

Gauge inch mm ±0.01 kPSI – Mpa [Min/Max]
Cal 18 0.047 1.20 255/295 – 1800/2060
Cal 17 ½ 0.051 1.30 255/295 – 1800/2060
Cal 17 0.054 1.37 255/295 – 1440/2060

SPRING TYPE SELFA

Cal inch mm ±0.01 kPSI – Mpa [Min/Max] L(mt) Lbs/[kgr]
Cal 11 0.120 3.06 225/265 – 1610/1830 33.5 12.0/[5.44]
Cal 10 0.135 3.43 190/220 – 1350/1560 28.5 11.5/[5.22]
Cal 9 0.148 3.77 185/215 – 1300/1530 30.0 14.5/[6.58

SPRING TYPE TENSION

Gauge inch mm ±0.01 kPSI – Mpa [Min/Max]
Cal 12 0.106 2.68 220/260 – 1650/1780
Cal 11 0.120 3.06 225/265 – 1610/1830
Cal 10 0.135 3.43 190/220 – 1350/1560
Cal 9 0.148 3.77 185/215 – 1300/1530

VARILLA

Gauge inch mm ±0.01 kPSI – Mpa [Min/Max]
Cal 9 0.148 3.77 185/215 - 1200/1400
Cal 8 0.162 4.12 180/210 - 1170/1360
Cal 7 0.177 4.50 175/205 - 1140/1330
Cal 6 0.192 4.88 170/200 - 1100/1300
Cal 5 ½ 0.197 5.00 165/195 - 1070/1270

BEDFRAMES

Type inch cms
Imperial 39" x 75" 99 cm x 190 cm
Imperial L 39" x 80" 100 cm x 203 cm
Matrimonial 54" x 75" 137 cm x 190 cm
Matrimonial L 54" x 80" 137 cm x 203 cm
Queen 60" x 80" 152 cm x 203 cm
King 76" x 80" 193 cm x 203 cm
California King 72" x 84" 183 cm x 213 cm

Low Carbon Steel Wire.

Low carbon Steel wire, cold drawn, with quality properties and planned to manufacture different type of products.

USES:
Recommended for the manufacture of:

  • Dispensers snacks
  • Dispensers magazines
  • Beverage dispensers
  • Supermarket trolleys
  • Plastified shelves
  • Grills refrigerators
  • Grills kitchen
  • Protection grids fans
  • Coat hooks
  • Staples
  • Nail
  • Bale ties for baling cotton
  • Furniture and garden accessories

Carbon Wire with Low Carbon Content for special uses

Gauge inch mm
±0.01
Stress Force Ksi [Mpa]
Min [mm]               Max[mm]
Cal 18 0.047 1.20 120/140 800/935
Cal 14 0.080 2.02
Cal 13 0.091 2.32 55/115 365/765
Cal 08 0.162 4.12 365/765
Cal 07 0.177 4.50 50/110 335/735
Cal 04 0.023 5.72
Cal 03 0.245 6.20 45/105 300/700
Cal 1/0 0.307 7.80





Automatic Assembly Wire.

Description:

Wire processed with the international standard ASTM A407 and used in the conformation of mattresses of beds and furniture in Gauges 17, 17 1/2 and 18, helical type popularly known as "gusanillo spring"

Uses:
Conformation of springs and mattress support structure.

Automatic Assembly Wire.

Gauge inch mm ±0.01 kPSI – Mpa [Min/Max]
Cal 18 0.047 1.20 255/295 – 1800/2060
Cal 17 ½ 0.051 1.30 255/295 – 1800/2060
Cal 17 0.054 1.37 255/295 – 1440/2060
Final Uses:


Assembly Wire

Description:

Wire processing with international standard ASTM A407 and used in mattresses and furniture in gauge 16 and 18 helical type.

Uses:
Conformation spring and mattress support structure.


Assembly Type

Gauge inch mm 
±0.01
Stress Force Ksi [Mpa] 
Min [mm]               Max[mm]
Cal 16 0.063 1.60 50,000 80,000
Cal 18 0.047 1.20 40,000 70,000




Rod in High and Low Carbon


High Carbon Steel Rods

Description:

Rods made with high carbon drawn wire under International Standard ASTM A407, in 9, 8, 7, 6 and 5 1/2 calibers. Used for the structural conformation of mattresses for beds and furniture.

Uses:
Frames of beds and furniture.

Rod in High and Low Carbon

Gauge inch mm ±0.01 kPSI – Mpa [Min/Max]
Cal 9 0.148 3.77 185/215 - 1200/1400
Cal 8 0.162 4.12 180/210 - 1170/1360
Cal 7 0.177 4.50 175/205 - 1140/1330
Cal 6 0.192 4.88 170/200 - 1100/1300
Cal 5 ½ 0.197 5.00 165/195 - 1070/1270

Low Carbon Steel Rods

Description:

Rods made with low carbon drawn wire, according to International Standard ASTM A29 in calibres5 ½ to 13. Used for concrete reinforcements, exhibitors and special uses.

Uses:
Construction and Exhibitors.

Low Carbon Steel Rods

Gauge inch mm ±0.01 kPSI – Mpa [Min/Max]
Cal 13 0.913 2.32
Cal 12 0.105 2.68
Cal 11 0.120 3.06
Cal 10 0.135 3.43
Cal 9 0.148 3.77 185/215 - 1200/1400
Cal 8 0.162 4.12 180/210 - 1170/1360
Cal 7 0.177 4.50 175/205 - 1140/1330
Cal 6 0.192 4.88 170/200 - 1100/1300
Cal 5 ½ 0.197 5.00 165/195 - 1070/1270

Springs Type Selfa.

Manufactured high carbon spring wire, cold drawn, processed with the International standard ASTM A-407, which specifies round wire, cold drawing quality properties and planned manufacturing steel springs upholstery and bedding.

Description:

Zig Zag Spring, manufactured in gauge 9, 10 and 11, step 22mm and height 48mm and of step 28mm and height 53mm and other measures.

Uses:
In furniture and car seats

SPRING TYPE SELFA

Cal inch mm ±0.01 kPSI – Mpa [Min/Max] L(mt) Lbs/[kgr]
Cal 11 0.120 3.06 225/265 – 1610/1830 33.5 12.0/[5.44]
Cal 10 0.135 3.43 190/220 – 1350/1560 28.5 11.5/[5.22]
Cal 9 0.148 3.77 185/215 – 1300/1530 30.0 14.5/[6.58

Short Tension Spring

Short Tension Spring manufactured with high carbon content, cold drawn, processed with the International standard ASTM A-407, which specifies round wire, cold drawn with properties expected for the production and quality spring steel for upholstery and mattresses

Description:

helical spring 10, 12 and 14 laps, with swing hook on the ends.

Uses:
In bed mattresses and furniture.

TENSION SPRING

Gauge inch mm ±0.01 kPSI – Mpa [Min/Max]
Cal 12 0.106 2.68 220/260 – 1650/1780
Cal 11 0.120 3.06 225/265 – 1610/1830
Cal 10 0.135 3.43 190/220 – 1350/1560
Cal 9 0.148 3.77 185/215 – 1300/1530

Bed frames Steel.

As part of the development, innovation and expansion of new products, REASA, has started with the manufacture of steel frames for bed, this is an added value that our company facilitates and offers its customers in the Mattress Industry.

We are always at the forefront of technology and according to the demands of our customers, so we have acquired two innovative equipment for the manufacture of this new product, which is manufactured under strict quality control to our customers, products and services Of the highest quality.

Description:

Bed frames Steel, manufactured with High Carbon steel wire, processed with the International standard ASTM A-407, in gauge 8, 7 and 6. Usedforstructuralconformation of beds mattresses.

BED FRAMES STEEL

Gauge Diameter
8 4.00 mm - 4.15 mm
7 4.30 mm - 4.50 mm
6 4.70 mm - 4.90 mm

Technical Characteristics of the Mattress Frame

Type Measure [Inchs] Measure [Centimeters]
Imperial 39" x 75" 99 cm x 190 cm
Imperial L 39" x 80" 100 cm x 203 cm
Matrimonial 54" x 75" 137 cm x 190 cm
Matrimonial L 54" x 80" 137 cm x 203 cm
Queen 60" x 80" 152 cm x 203 cm
King 76" x 80" 193 cm x 203 cm
California King 72" x 84" 183 cm x 213 cm


Lecterns


Non Returnable Stands from 600.0 kg to 700.0 kg
PACKAGING: Wire packed with plastic for protection and transfer

Rolls Compacted with Carton


Compact Rolls with Cardboard Center from 640 to 680 kg, 740-780kg
PACKAGING: Wire packed with Antirust paper, moisture inhibitor for proper protection and protection.

Compacted rolls


Compacted rolls from 500 to 750 kg.
PACKAGING: Wire packed with plastic for protection

Rolls uncompacted


Compacted rolls from 200 to 250 kg.
PACKAGING: Wire packed with stretch film & anti-rust packaging for protection

Selfa Spring Type


Zig Zag Spring
PACKAGING: Bundles of 10 Rolls packed with stretch film

Steel Rod


PACKAGING: Bundles of 30 ,50 and 100 Units

Steel frames for mattress structure


Steel frames for mattress structure
PACKAGING: Bundles of 50 Units, stowed in metal corners